HAMi Enterprise 2.10.0-r5
| Chart 版本 | Chart 声明的 appVersion | 发布日期 |
|---|---|---|
2.10.0-r5 | 2.10.0-r5 | 2026 年 11 月 6 日 |
本次为 patch 版本,以下变化以 HAMi Enterprise v2.10.0-r4 为比较基线。
软件变更
- 扩展多厂商设备的许可证支持,新增按设备型号授权及授权状态标注。升级前请通过交付渠道确认许可证覆盖所用设备型号和数量。
- 修复 NVIDIA 工作负载在默认启用的 Downward API 路径(
scheduler.useDownward: true)下的算力限制环境变量名。调度器现在通过CUDA_DEVICE_SM_LIMIT将容器标注中的算力配额传给运行库。 - 修复 PPU 拓扑调度:包含拓扑策略的组合调度策略现在也会进行拓扑选择;候选组合的拓扑得分为零或负数时,不再因此遗漏可用组合。
- 调整 Ascend 模式选择。未指定
huawei.com/vnpu-mode的 Pod 按候选节点能力选择模板切分或 hami-core 软切分;申请正数-core资源时,自动选择 hami-core。显式指定template的 Pod 仍遵循模板切分的资源限制。 - Ascend 模板取整后的实际分配量会再次检查命名空间配额;hami-core 调度保留设备注册的算力容量倍率,单个工作负载的每卡算力请求仍不超过 100%。
Chart 变更
- 新增
legacySelectorLabels,默认false。调度器和 NVIDIA 设备插件的 selector 默认使用 Chart 名称(或nameOverride)及 Helm release 名称。旧部署升级时需设为true,保留历史 selector,详见下文。 - Ascend 拆分数量配置由
devices.ascend.vnpuDeviceSplitCount改为devices.ascend.deviceSplitCount,默认10,必须为正整数。它控制软切分时每张物理 NPU 的虚拟设备槽位数;正数节点配置vDeviceCount优先,模板切分仍按模板计算容量。 - 新增 Ascend 模式、算力策略和容量倍率配置,默认值见下表。Ascend 设备插件及运行库独立交付,主 Chart 不安装它们。
- 主组件默认镜像标签更新为
v2.10.0-r5。配套 CRD Chart0.4.2与 Resource Pool Manager Chart0.0.6的版本号未变;后者默认镜像仍为v0.0.2,需按独立组件的交付版本确认其能力。
| 主 Chart 配置 | 默认值 | 含义与条件 |
|---|---|---|
devices.ascend.hamiVnpuMode | "" | 可设为 template、hami-core(别名 hamiCore)或 enpu。为空时沿用 hamiVnpuCore,其默认值为 false。节点和设备实际能力由插件注册。 |
devices.ascend.hamiCorePolicy | spatial | hami-core 运行时算力策略,可选 spatial、dynamic、fixed、overdraft。Pod 注解 huawei.com/npu-sched-policy 优先于节点 hamiCorePolicy,节点配置优先于全局值。 |
devices.ascend.deviceCoreScaling | 1 | hami-core 注册的算力百分比容量倍率,取值至少为 1。例如 2 表示注册 200% 总容量,不改变单个工作负载每卡最多申请 100% 的限制。 |
devices.ascend.enpuPolicy | elastic | 可选 ENPU 后端的默认策略,可选 fixed-share、elastic、best-effort;Pod 注解 huawei.com/enpu-policy 可覆盖默认值。需另行部署配套插件、运行库和运行环境。 |
升级说明
保留旧部署的 selector
从 2.10.0-r4 升级现有部署时,在保留原配置的基础上加入以下设置,并在后续升级中继续保留:
legacySelectorLabels: true
旧版调度器 Deployment 和 NVIDIA 设备插件 DaemonSet 的 selector 使用固定的 hami/hami 标签。直接采用新版默认值会改变不可变的 selector,导致升级失败。新安装使用默认 false。自定义监控或运维规则若按这些标签选择资源,应与实际部署的标签保持一致。
迁移 Ascend 配置
将原有 devices.ascend.vnpuDeviceSplitCount 改名为 devices.ascend.deviceSplitCount,保留原数值。仅保留旧 Helm 键不会把自定义值传入新版默认模板。未自定义时继续使用默认值 10。
devices:
ascend:
deviceSplitCount: 10
使用 device-config.content 时,该配置会完整替换默认设备配置,不逐项合并。应在自定义内容的 vnpus 映射下同步设置 deviceSplitCount,保留 configs 型号列表及原有必要配置;仅修改 devices.ascend.* 不会改变这份自定义内容。
调度器和 Ascend 插件应使用同一份设备配置,并配套升级支持上述字段的插件与运行库。独立 Ascend 插件 v1.5.0(Chart 0.3.2)提供这些配置接口。复用调度器 ConfigMap 时,独立插件 Chart 设置 config.create: false,并将 config.deviceConfigMapName 指向同一命名空间中实际的调度器设备 ConfigMap。升级后检查节点注册的模式、虚拟设备槽位数和算力容量是否与配置一致。
配套新版插件的默认算力控制改为采用 hamiCorePolicy,默认 spatial。spatial 使用协作式核数预算,不保证独占硬件分区或按比例分配吞吐;dynamic 按相对份额调度并允许借用空闲算力;fixed 按运行和休眠时间比例控制目标百分比;overdraft 允许空闲状态下的有界借用。需要保留旧固定调度行为时,在独立插件 Chart 中显式保留 hamiVnpuCore.coreUtilizationPolicy: force。业务容器已有的 NPU_CORE_UTILIZATION_POLICY 设置优先于插件默认值。
ENPU 需显式使用 Pod 注解 huawei.com/vnpu-mode: enpu,每个容器仅分配一个物理 DIE,且不能与 hami-core 共用同一个 DIE。同一 DIE 的 ENPU 实例须采用相同策略:fixed-share 按份额分配时间片,elastic 可借用空闲算力,best-effort 不按份额限制算力。该后端需要单独准备兼容的运行库、驱动、CANN 和 RuntimeClass;仅设置主 Chart 参数不会完成部署。ENPU 部署与升级应使用交付渠道提供的对应版本配置,不能将主 Chart 升级视为已启用 ENPU 或显存超分。
更新 NVIDIA 工作负载
CUDA_DEVICE_CORE_LIMIT 随 NVIDIA Downward API 分配功能引入,首个包含它的已发布企业版本为 v2.7.1-rc0(2026 年 1 月 16 日),此后沿用至 v2.10.0-r4。旧版调度器把 Pod 申请的算力百分比通过容器标注写入该环境变量,但运行库读取的是 CUDA_DEVICE_SM_LIMIT,无法从旧变量名取得配额。
在默认 Downward API 分配路径下,若没有其他有效的 CUDA_DEVICE_SM_LIMIT 或逐设备配置,运行库会按 100% 初始化算力上限。例如,Pod 申请 20% 算力时,调度器仍按申请值分配资源,但运行时不会通过这个错误变量取得 20% 的限制。本次修复将注入变量名改为 CUDA_DEVICE_SM_LIMIT,配额数值和调度侧资源计账不变;非 Downward API 分配路径原本就使用正确变量,不受此命名错误影响。
scheduler.useDownward 默认为 true。使用默认配置的 NVIDIA 工作负载在升级调度器后,应按业务更新流程重新创建受影响的 Pod,使准入处理重新注入 CUDA_DEVICE_SM_LIMIT。现有 Pod 的环境变量不会因调度器升级而自动替换。自定义清单若引用旧变量 CUDA_DEVICE_CORE_LIMIT,应同步改用 CUDA_DEVICE_SM_LIMIT。
安装包及组件清单通过约定的交付渠道获取。查看Chart 与 appVersion 对应关系或软件中心。
Values 说明
以下参数说明取自 Chart 2.10.0-r5 发布包随附的 README,保留原文。默认配置以该版本的 values.yaml 为准。
展开参数表
| Key | Type | Default | Description |
|---|---|---|---|
| birenResourceName | string | "birentech.com/gpu" | Biren GPU resource name |
| device-config.content | string | "" | |
| devicePlugin.cdiVendor | string | "" | CDI vendor for generated specs and device annotations (default: k8s.device-plugin.nvidia.com) |
| devicePlugin.createRuntimeClass | bool | false | Whether to create runtime class |
| devicePlugin.deviceCoreScaling | int | 1 | Device core scaling factor |
| devicePlugin.deviceListStrategy | string | "envvar" | Device list strategy. Supported values: envvar, volume-mounts, cdi-annotations |
| devicePlugin.deviceMemoryScaling | int | 1 | Device memory scaling factor |
| devicePlugin.deviceSplitCount | int | 10 | Number of slices to split each GPU into |
| devicePlugin.disablecorelimit | string | "false" | Disable core limit |
| devicePlugin.enableNumaTopology | bool | false | Advertise the physical GPU's NUMA node on each vGPU replica |
| devicePlugin.enabled | bool | true | Enable device plugin |
| devicePlugin.extraArgs | list | ["-v=4"] | Extra arguments for device plugin |
| devicePlugin.extraEnvs | list | [] | Extra environment variables for device plugin as a Kubernetes env list. |
| devicePlugin.gdrcopyEnabled | bool | false | Enable GDRCopy |
| devicePlugin.gdsEnabled | bool | false | Enable GDS |
| devicePlugin.gpuOperatorToolkitReady.enabled | bool | false | Enable GPU operator toolkit ready check |
| devicePlugin.gpuOperatorToolkitReady.hostPath | string | "/run/nvidia/validations" | Host path for GPU operator toolkit ready check |
| devicePlugin.gpuOperatorToolkitReady.securityContext | object | {"privileged":true,"runAsUser":0} | Security context for the GPU operator toolkit validation init container |
| devicePlugin.hostNetwork | bool | false | Share the host network namespace with the device plugin pod |
| devicePlugin.hostPID | bool | true | Share the host PID namespace with the device plugin pod |
| devicePlugin.image.pullPolicy | string | "IfNotPresent" | Device plugin image pull policy |
| devicePlugin.image.pullSecrets | list | [] | Specify docker-registry secret names as an array |
| devicePlugin.image.registry | string | "ghcr.io" | Device plugin image registry |
| devicePlugin.image.repository | string | "dynamia-ai/hami-enterprise" | Device plugin image repository |
| devicePlugin.image.tag | string | "" | Device plugin image tag (immutable tags are recommended) |
| devicePlugin.libPath | string | "/usr/local/vgpu" | Library path for vGPU |
| devicePlugin.migStrategy | string | "none" | MIG strategy. Supported values: none, single, mixed |
| devicePlugin.mofedEnabled | bool | false | Enable Mellanox OFED |
| devicePlugin.monitor.ctrPath | string | "/usr/local/vgpu/containers" | Container path for monitor |
| devicePlugin.monitor.extraArgs | list | ["-v=4"] | Extra arguments for monitor |
| devicePlugin.monitor.extraEnvs | list | [] | Extra environment variables for monitor as a Kubernetes env list. |
| devicePlugin.monitor.image.pullPolicy | string | "IfNotPresent" | Monitor image pull policy |
| devicePlugin.monitor.image.pullSecrets | list | [] | Specify docker-registry secret names as an array |
| devicePlugin.monitor.image.registry | string | "ghcr.io" | Monitor image registry |
| devicePlugin.monitor.image.repository | string | "dynamia-ai/hami-enterprise" | Monitor image repository |
| devicePlugin.monitor.image.tag | string | "" | Monitor image tag (immutable tags are recommended) |
| devicePlugin.monitor.resources | object | {} | Resources for monitor container |
| devicePlugin.monitor.resyncInterval | string | "5m" | Resync interval for monitor |
| devicePlugin.monitor.securityContext | object | {"allowPrivilegeEscalation":false,"capabilities":{"add":["SYS_ADMIN"],"drop":["ALL"]}} | Security context for the monitor container |
| devicePlugin.nodeConfiguration.config | string | "{\n \"nodeconfig\": [\n {\n \"name\": \"your-node-name\",\n \"operatingmode\": \"hami-core\",\n \"devicememoryscaling\": 1,\n \"devicesplitcount\": 10,\n \"preconfigureddevicememory\": 0,\n \"enablenumatopology\": false,\n \"migstrategy\": \"none\",\n \"filterdevices\": {\n \"uuid\": [],\n \"index\": []\n },\n \"enablegetpreferredallocation\": false\n }\n ]\n}\n" | Node configuration for device plugin. If set, overrides the default config.json |
| devicePlugin.nodeConfiguration.externalConfigName | string | "" | Name of an existing ConfigMap to use for node configuration |
| devicePlugin.numaRefit | object | {"caFile":"","caSecret":"","enabled":false,"schedulerEndpoint":"","tlsInsecure":true} | NUMA alignment refit configuration |
| devicePlugin.numaRefit.caFile | string | "" | Path to a CA bundle already mounted in the device-plugin Pod |
| devicePlugin.numaRefit.caSecret | string | "" | Secret containing ca.crt, mounted at /etc/hami/numa-refit-ca |
| devicePlugin.numaRefit.enabled | bool | false | Enable NUMA alignment refit |
| devicePlugin.numaRefit.schedulerEndpoint | string | "" | Scheduler base URL override. Defaults to the in-cluster Scheduler service |
| devicePlugin.numaRefit.tlsInsecure | bool | true | Skip Scheduler TLS verification. Set false with caFile or caSecret to verify TLS |
| devicePlugin.nvidiaDriverRoot | string | "" | NVIDIA driver root on the host, mounted into the device plugin and monitor containers |
| devicePlugin.nvidiaHookPath | string | "" | Path for NVIDIA hook |
| devicePlugin.nvidiaNodeSelector | object | {"gpu":"on"} | Node selector for NVIDIA device plugin |
| devicePlugin.passDeviceSpecsEnabled | bool | false | Enable passing device specs |
| devicePlugin.pluginPath | string | "/var/lib/kubelet/device-plugins" | Path for device plugin socket |
| devicePlugin.podAnnotations | object | {} | Annotations for device plugin pod |
| devicePlugin.preConfiguredDeviceMemory | int | 0 | Pre-configured device memory in MB for GPUs that don't support memory query. Set to 0 for auto-detection |
| devicePlugin.resources | object | {} | Resources for device plugin container |
| devicePlugin.runtimeClassName | string | "" | Runtime class name to be used by the device plugin |
| devicePlugin.securityContext | object | {"allowPrivilegeEscalation":true,"capabilities":{"add":["SYS_ADMIN"],"drop":["ALL"]},"privileged":true} | Security context for the device plugin container |
| devicePlugin.service.annotations | object | {} | Annotations for device plugin service |
| devicePlugin.service.httpPort | int | 31992 | HTTP port for device plugin service |
| devicePlugin.service.labels | object | {} | Labels for device plugin service |
| devicePlugin.service.type | string | "NodePort" | Service type for device plugin |
| devicePlugin.tolerations | list | [{"effect":"NoSchedule","key":"nvidia.com/gpu","operator":"Exists"}] | Tolerations for device plugin pod |
| devicePlugin.updateStrategy.rollingUpdate.maxUnavailable | int | 1 | Maximum unavailable pods during update |
| devicePlugin.updateStrategy.type | string | "RollingUpdate" | Update strategy for device plugin DaemonSet |
| devices.alibaba.customresources | list | ["alibaba.com/ppu","alibaba.com/ppu-memory","alibaba.com/gpu-core"] | Custom resource definitions for Alibaba devices |
| devices.alibaba.enabled | bool | true | Enable Alibaba PPU device |
| devices.alibaba.ppuCorePolicy | string | "default" | PPU core policy for Alibaba devices |
| devices.amd.customresources | list | ["amd.com/gpu","amd.com/gpumem","amd.com/gpucores"] | Custom resource definitions for AMD devices |
| devices.ascend.customresources | list | ["huawei.com/Ascend910A","huawei.com/Ascend910A-memory","huawei.com/Ascend910A-core","huawei.com/Ascend910B2","huawei.com/Ascend910B2-memory","huawei.com/Ascend910B2-core","huawei.com/Ascend910B3","huawei.com/Ascend910B3-memory","huawei.com/Ascend910B3-core","huawei.com/Ascend910B4","huawei.com/Ascend910B4-memory","huawei.com/Ascend910B4-core","huawei.com/Ascend910B4-1","huawei.com/Ascend910B4-1-memory","huawei.com/Ascend910B4-1-core","huawei.com/Ascend310P","huawei.com/Ascend310P-memory","huawei.com/Ascend310P-core","huawei.com/Ascend910C","huawei.com/Ascend910C-memory","huawei.com/Ascend910C-core"] | Custom resource definitions for Ascend devices |
| devices.ascend.deviceCoreScaling | int | 1 | hami-core advertised percentage capacity multiplier; each workload still requests at most 100 percent. |
| devices.ascend.deviceSplitCount | int | 10 | Number of virtual devices advertised per physical Ascend NPU in soft-slicing mode. A positive node-level vDeviceCount overrides it. |
| devices.ascend.enabled | bool | false | Enable Ascend device plugin |
| devices.ascend.enpuPolicy | string | "elastic" | Default ENPU policy; enabling ENPU also requires compatible runtime assets on the node. |
| devices.ascend.extraArgs | list | [] | Extra arguments for Ascend device plugin |
| devices.ascend.hamiCorePolicy | string | "spatial" | Default hami-core runtime policy; Pod and node settings take precedence. Explicit enterprise force/disable controls remain effective. |
| devices.ascend.hamiVnpuCore | bool | false | Enable soft-partitioning based on hami-vnpu-core (node-level annotation takes higher priority) |
| devices.ascend.hamiVnpuMode | string | "" | Backend: template, hami-core (alias hamiCore), or enpu. Empty preserves hamiVnpuCore compatibility. |
| devices.ascend.image | string | "" | Ascend device plugin image |
| devices.ascend.imagePullPolicy | string | "IfNotPresent" | Image pull policy for Ascend device plugin |
| devices.ascend.nodeSelector | object | {"ascend":"on"} | Node selector for Ascend device plugin |
| devices.ascend.runtimeClassName | string | "" | Runtime class name for Ascend NPU pods |
| devices.ascend.tolerations | list | [] | Tolerations for Ascend device plugin |
| devices.awsneuron.customresources | list | ["aws.amazon.com/neuron","aws.amazon.com/neuroncore"] | Custom resource definitions for AWS Neuron devices |
| devices.biren.customresources | list | ["birentech.com/gpu"] | Custom resource definitions for Biren devices |
| devices.biren.enabled | bool | true | Enable Biren device plugin |
| devices.enflame.customresources | list | ["enflame.com/drs-gcu","enflame.com/gcu-memory","enflame.com/gcu-core","enflame.com/gcu","enflame.com/vgcu","enflame.com/vgcu-percentage"] | Custom resource definitions for Enflame devices |
| devices.enflame.enabled | bool | true | Enable Enflame device plugin |
| devices.iluvatar.customresources | list | ["iluvatar.ai/BI-V100-vgpu","iluvatar.ai/BI-V100.vCore","iluvatar.ai/BI-V100.vMem","iluvatar.ai/BI-V150-vgpu","iluvatar.ai/BI-V150.vCore","iluvatar.ai/BI-V150.vMem","iluvatar.ai/MR-V100-vgpu","iluvatar.ai/MR-V100.vCore","iluvatar.ai/MR-V100.vMem","iluvatar.ai/MR-V50-vgpu","iluvatar.ai/MR-V50.vCore","iluvatar.ai/MR-V50.vMem"] | Custom resource definitions for Iluvatar devices |
| devices.iluvatar.enabled | bool | false | Enable Iluvatar device plugin |
| devices.kunlun.customresources | list | ["kunlunxin.com/xpu","kunlunxin.com/vxpu","kunlunxin.com/vxpu-memory"] | Custom resource definitions for Kunlun devices |
| devices.kunlun.enabled | bool | true | Enable Kunlun device plugin |
| devices.mthreads.customresources | list | ["mthreads.com/vgpu"] | Custom resource definitions for MThreads devices |
| devices.mthreads.enabled | bool | true | Enable MThreads device plugin |
| devices.nvidia.gpuCorePolicy | string | "default" | GPU core policy for NVIDIA devices |
| devices.nvidia.libCudaLogLevel | int | 2 | libCUDA log level |
| devices.vastai.customresources | list | ["vastaitech.com/va"] | Custom resource definitions for Vastai devices |
| devices.vastai.enabled | bool | true | Enable Vastai device plugin |
| dra.enabled | bool | false | Enable DRA (Dynamic Resource Allocation) |
| enflameResourceNameDRSGCU | string | "enflame.com/drs-gcu" | Enflame DRS GCU resource name |
| enflameResourceNameGCUCore | string | "enflame.com/gcu-core" | Enflame GCU core resource name |
| enflameResourceNameGCUMemory | string | "enflame.com/gcu-memory" | Enflame GCU memory resource name |
| enflameResourceNameVGCU | string | "enflame.com/vgcu" | Enflame VGCU resource name |
| enflameResourceNameVGCUPercentage | string | "enflame.com/vgcu-percentage" | Enflame VGCU percentage resource name |
| fullnameOverride | string | "" | Override the fullname of the chart |
| global.annotations | object | {} | Global annotations to add to all resources |
| global.gpuHookPath | string | "/usr/local" | Path for GPU hook installation on nodes |
| global.imagePullSecrets | list | [] | Global Docker image pull secrets |
| global.imageRegistry | string | "" | Global Docker image registry |
| global.imageTag | string | "v2.10.0-r5" | Global image tag for HAMi Enterprise components |
| global.labels | object | {} | Global labels to add to all resources |
| global.managedNodeSelector | object | {"usage":"gpu"} | Node selector configuration for managed GPU nodes |
| global.managedNodeSelectorEnable | bool | false | Enable managed node selector for GPU nodes |
| hami-dra.drivers.nvidia.containerDriver | bool | true | Enable container driver for NVIDIA DRA |
| hami-dra.drivers.nvidia.enabled | bool | true | Enable NVIDIA DRA driver |
| hami-dra.drivers.nvidia.image.repository | string | "ghcr.io/project-hami/k8s-dra-driver" | NVIDIA DRA driver image repository |
| hami-dra.drivers.nvidia.image.tag | string | "main" | NVIDIA DRA driver image tag |
| hami-dra.monitor.enabled | bool | true | Enable monitor for hami-dra |
| hcuResourceCores | string | "hygon.com/hcucores" | Hygon HCU cores resource name |
| hcuResourceMem | string | "hygon.com/hcumem" | Hygon HCU memory resource name |
| hcuResourceName | string | "hygon.com/hcunum" | Hygon HCU resource name |
| kunlunResourceName | string | "kunlunxin.com/xpu" | Kunlun XPU resource name |
| kunlunResourceVCountName | string | "kunlunxin.com/vxpu" | Kunlun virtual XPU count resource name |
| kunlunResourceVMemoryName | string | "kunlunxin.com/vxpu-memory" | Kunlun virtual XPU memory resource name |
| legacyMetrics | bool | false | Enable legacy metrics |
| legacySelectorLabels | bool | false | Keep historical hami/hami scheduler and NVIDIA device-plugin selector labels. Enable when upgrading an existing Enterprise release and keep enabled on subsequent upgrades. |
| metaxResourceCore | string | "metax-tech.com/vcore" | Metax sGPU core resource name |
| metaxResourceMem | string | "metax-tech.com/vmemory" | Metax sGPU memory resource name |
| metaxResourceName | string | "metax-tech.com/sgpu" | Metax sGPU resource name |
| metaxsGPUTopologyAware | string | "false" | Enable Metax sGPU topology awareness |
| mluResourceCores | string | "cambricon.com/mlu.smlu.vcore" | MLU cores resource name |
| mluResourceMem | string | "cambricon.com/mlu.smlu.vmemory" | MLU memory resource name |
| mluResourceName | string | "cambricon.com/vmlu" | MLU resource name |
| mockDevicePlugin.enabled | bool | false | Enable mock device plugin |
| mockDevicePlugin.image.pullPolicy | string | "IfNotPresent" | Mock device plugin image pull policy |
| mockDevicePlugin.image.pullSecrets | list | [] | Specify docker-registry secret names as an array |
| mockDevicePlugin.image.registry | string | "docker.io" | Mock device plugin image registry |
| mockDevicePlugin.image.repository | string | "projecthami/mock-device-plugin" | Mock device plugin image repository |
| mockDevicePlugin.image.tag | string | "1.0.1" | Mock device plugin image tag |
| nameOverride | string | "" | Override the chart name |
| namespaceOverride | string | "" | Override the namespace |
| openshift.securityContextConstraints.create | bool | true | Create the named device-plugin SCC and its use ClusterRole when OpenShift support is enabled. Set this to false only when both the SCC and system:openshift:scc:<name> ClusterRole already exist, such as for the built-in privileged SCC. |
| openshift.securityContextConstraints.name | string | "hami-device-plugin" | SCC granted to enabled device-plugin service accounts. When create=false, the matching system:openshift:scc:<name> ClusterRole must already exist. The built-in privileged SCC requires create=false. |
| platform.openshift | bool | false | Enable OpenShift-specific resources and handling |
| platform.openshiftVersion | string | "" | OpenShift version used to resolve the Red Hat OpenShift hyperkube image tag when platform.openshift=true and scheduler.kubeScheduler.image.tag is empty |
| podSecurityPolicy.enabled | bool | false | Enable PodSecurityPolicy |
| prometheus.enabled | bool | false | Enable Prometheus metrics |
| resourceCores | string | "nvidia.com/gpucores" | NVIDIA GPU cores resource name |
| resourceMem | string | "nvidia.com/gpumem" | NVIDIA GPU memory resource name |
| resourceMemPercentage | string | "nvidia.com/gpumem-percentage" | NVIDIA GPU memory percentage resource name |
| resourceName | string | "nvidia.com/gpu" | NVIDIA GPU resource name |
| resourcePriority | string | "nvidia.com/priority" | NVIDIA GPU priority resource name |
| scheduler.admissionWebhook.customURL.enabled | bool | false | Enable custom webhook URL |
| scheduler.admissionWebhook.customURL.host | string | "127.0.0.1" | Webhook host (must be an endpoint using https) |
| scheduler.admissionWebhook.customURL.path | string | "/webhook" | Webhook path |
| scheduler.admissionWebhook.customURL.port | int | 31998 | Webhook port |
| scheduler.admissionWebhook.enabled | bool | true | Enable admission webhook. If disabled, pods must be configured with correct schedulerName manually |
| scheduler.admissionWebhook.failurePolicy | string | "Ignore" | Failure policy for webhook |
| scheduler.admissionWebhook.manageNamespaceSelector | bool | true | Whether the chart renders and manages the webhook's namespaceSelector field |
| scheduler.admissionWebhook.namespaceSelector | object | {"matchExpressions":[],"matchLabels":{}} | Namespace selector for webhook |
| scheduler.admissionWebhook.objectSelector | object | {"matchExpressions":[]} | Object selector for webhook |
| scheduler.admissionWebhook.reinvocationPolicy | string | "Never" | Reinvocation policy for webhook |
| scheduler.admissionWebhook.whitelistNamespaces | list | [] | Namespaces that the webhook will not be applied to |
| scheduler.certManager.enabled | bool | false | Enable cert-manager for TLS certificate generation |
| scheduler.defaultSchedulerPolicy.gpuSchedulerPolicy | string | "spread" | GPU-level scheduling policy. Supported values: binpack, spread |
| scheduler.defaultSchedulerPolicy.nodeSchedulerPolicy | string | "binpack" | Node-level scheduling policy. Supported values: binpack, spread |
| scheduler.extender.extraArgs | list | ["--debug","-v=4"] | Extra arguments for scheduler extender |
| scheduler.extender.image.pullPolicy | string | "IfNotPresent" | Scheduler extender image pull policy |
| scheduler.extender.image.pullSecrets | list | [] | Specify docker-registry secret names as an array |
| scheduler.extender.image.registry | string | "ghcr.io" | Scheduler extender image registry |
| scheduler.extender.image.repository | string | "dynamia-ai/hami-enterprise" | Scheduler extender image repository |
| scheduler.extender.image.tag | string | "" | Scheduler extender image tag (immutable tags are recommended) |
| scheduler.extender.resources | object | {} | Resources for scheduler extender container |
| scheduler.forceOverwriteDefaultScheduler | bool | true | Force overwrite the default scheduler name in pods when it equals the K8s default scheduler name |
| scheduler.kubeScheduler.enabled | bool | true | Whether to run kube-scheduler container in the scheduler pod |
| scheduler.kubeScheduler.extraArgs | list | ["--policy-config-file=/config/config.json","-v=4"] | Extra arguments for kube-scheduler (legacy config format) |
| scheduler.kubeScheduler.extraNewArgs | list | ["--config=/config/config.yaml","-v=4"] | Extra arguments for kube-scheduler (new config format) |
| scheduler.kubeScheduler.image.pullPolicy | string | "IfNotPresent" | kube-scheduler image pull policy |
| scheduler.kubeScheduler.image.pullSecrets | list | [] | Specify docker-registry secret names as an array |
| scheduler.kubeScheduler.image.registry | string | "registry.cn-hangzhou.aliyuncs.com" | kube-scheduler image registry |
| scheduler.kubeScheduler.image.repository | string | "google_containers/kube-scheduler" | kube-scheduler image repository |
| scheduler.kubeScheduler.image.tag | string | "" | kube-scheduler image tag (immutable tags are recommended) |
| scheduler.kubeScheduler.resources | object | {} | Resources for kube-scheduler container |
| scheduler.leaderElect | bool | true | Enable leader election for scheduler |
| scheduler.livenessProbe | bool | false | Enable liveness probe for scheduler |
| scheduler.metricsBindAddress | string | ":9395" | Address to bind metrics server |
| scheduler.nodeLockExpire | string | "5m" | Node lock expiration time |
| scheduler.nodeName | string | "" | Node name for scheduler pod. If installing as default scheduler, set this to skip the schedule workflow |
| scheduler.overwriteEnv | string | "false" | Overwrite environment variables |
| scheduler.patch.enabled | bool | true | Enable kube-webhook-certgen patch job |
| scheduler.patch.image.pullPolicy | string | "IfNotPresent" | kube-webhook-certgen image pull policy |
| scheduler.patch.image.pullSecrets | list | [] | Specify docker-registry secret names as an array |
| scheduler.patch.image.registry | string | "docker.io" | kube-webhook-certgen image registry |
| scheduler.patch.image.repository | string | "jettech/kube-webhook-certgen" | kube-webhook-certgen image repository |
| scheduler.patch.image.tag | string | "v1.5.2" | kube-webhook-certgen image tag |
| scheduler.patch.imageNew.pullPolicy | string | "IfNotPresent" | Kubernetes 1.22+ kube-webhook-certgen image pull policy |
| scheduler.patch.imageNew.pullSecrets | list | [] | Specify docker-registry secret names as an array |
| scheduler.patch.imageNew.registry | string | "registry.k8s.io" | Kubernetes 1.22+ kube-webhook-certgen image registry |
| scheduler.patch.imageNew.repository | string | "ingress-nginx/kube-webhook-certgen" | Kubernetes 1.22+ kube-webhook-certgen image repository |
| scheduler.patch.imageNew.tag | string | "v1.6.9" | Kubernetes 1.22+ kube-webhook-certgen image tag |
| scheduler.patch.nodeSelector | object | {} | Node selector for patch job |
| scheduler.patch.podAnnotations | object | {} | Annotations for patch job pod |
| scheduler.patch.priorityClassName | string | "" | Priority class name for patch job |
| scheduler.patch.runAsUser | int | 2000 | User ID to run patch job as. OpenShift omits this value at render time so its SCC can allocate an allowed UID |
| scheduler.patch.tolerations | list | [] | Tolerations for patch job |
| scheduler.podAnnotations | object | {} | Annotations for scheduler pod |
| scheduler.replicas | int | 1 | Number of scheduler replicas (only effective when leaderElect is true) |
| scheduler.service.annotations | object | {} | Annotations for scheduler service |
| scheduler.service.httpPort | int | 443 | HTTP port for scheduler service |
| scheduler.service.httpTargetPort | int | 9443 | Target port on which the scheduler extender listens |
| scheduler.service.labels | object | {} | Labels for scheduler service |
| scheduler.service.monitorPort | int | 31993 | Monitoring port for scheduler service |
| scheduler.service.monitorTargetPort | int | 9395 | Target port for monitoring |
| scheduler.service.schedulerPort | int | 31998 | NodePort for scheduler HTTP |
| scheduler.service.type | string | "NodePort" | Service type for scheduler |
| scheduler.tolerations | list | [] | Tolerations for scheduler pod |
| scheduler.useDownward | bool | true | Whether to enable useDownward in the generated scheduler device config for NVIDIA devices |
| schedulerName | string | "hami-scheduler" | Name of the scheduler |
| selinux.enabled | bool | false | Relabel shared vGPU host directories on SELinux-enabled Kubernetes nodes |
| selinux.level | string | "s0" | SELinux level applied to shared vGPU host directories |
| selinux.type | string | "container_file_t" | SELinux type applied to shared vGPU host directories |
| vastaiResourceName | string | "vastaitech.com/va" | Vastai resource name |